Cheetah Wrap vinyl

A newer brand with one clear specialty

Cheetah Wrap has been producing professional cast vinyl since 2018, decades after 3M, Avery Dennison and KPMF started. It earned its place by focusing on what installers want rather than catalog size: consistent color, reliable conformability and clean removal. The result is a 3.2 mil cast film with an air-release adhesive that does not grab until pressure is applied, which means fewer bubbles and cleaner relays on a long vehicle wrap panel like a truck bed side.

The reason most customers ask for it by name is a single series. Cheetah Wrap’s satin aluminum metallics, with names like Cheetah Green Metallic, Passion Purple Aluminum, Blue Aluminum, Black Rose Aluminum and Yellow Gold Aluminum, put a deep metallic flake under a satin sheen. The 3M and Avery Dennison catalogs have satin metallics of their own, but on a lifted Tacoma or a Tundra the finish reads like a custom paint job without the custom paint price.

The three series

Gloss covers the full spectrum from classic blacks and whites through bold metallics, pearls and specialty colors, with a deep paint-like finish and clean removal for up to 3 years.

Satin is the heart of the lineup: the sweet spot between gloss and matte, with the signature aluminum metallics alongside classic satin solids. It is the series the shop reaches for on truck wraps and luxury SUVs where the owner wants depth without full reflection. Matte is dead flat with no sheen and consistent texture across the color range, the choice for stealth builds, matte black trucks and military-green off-road rigs. All three share the same adhesive and 3-year rating.

Built for strong sun

Cheetah Wrap rates its films for 3 years of outdoor exposure. Cast construction is the other half of that story. Calendered vinyl is rolled under tension and spends its life trying to shrink back, which is why cheap wraps lift at edges after a season in the sun. Cast film has no such memory, so it sits flat in recesses, around handles and along body lines for the life of the warranty.

Installation at Offshore

A Cheetah Wrap full color change takes three business days at 430 Hookahi St in Wailuku; a full-size truck takes three to four. Handles, lights and badges come off, panels are laid and post-heated so the film locks into every curve, and jambs and edges are finished before reassembly. Partial wraps such as a hood or roof usually take 1 to 2 days. The film carries its manufacturer warranty and Offshore’s workmanship terms are on the warranty page.

Care for satin and matte films is the one thing to get right: hand wash with pH-neutral soap, use a matte-safe detail spray, never wax or polish, rinse off salt spray after the beach and skip brush car washes. Request a quote with the Cheetah Wrap color name and your vehicle, and judge a sample outdoors in daylight before anything is ordered.